Fully Automatic Die Cutting Lead Edge With or Without Stripping

• SPECIFICALLY DESIGNED FRONT FEEDING DEVICE
• PILE BAFFLE CAN BE ADJUSTED BY THE THICKNESS OF PAPER
• THE BAFFLES IN BOTH SIDES CAN BE ADJUSTED AUTOMATICALLY OR FINE ADJUSTED INDEPENDENTLY
• HIGH PRESSURE AIR BLOWER SELECTED, THE AIR VELOCITY IS VARIABLE FREQUENCY ADJUSTED

Die Cutting Unit

• THE HIGH ACCURATE DIE CUTTING LOWER PLATFORM IS CONSISTING OF A TURBINE CRANK SHAFT AND A TOGGLE JOINT
• THE HIGH PRECISION DIE CUTTING UPPER PLATFORM IS CONSISTING OF FIXED TOOL
• THE MAIN DRIVE IS CONSISTING OF TRIPLE GEAR COMBINATION WHICH IS DURABLE .
• OPERATING SAFETY AND LOCKING FRAMES SYSTEM
• BRAND PENUMATIC CLUTCH /BRAKE.
• ADVANCED MULTI-CAM INTERMITTENT DRIVE
• IMPORTED TORSION CLUTCH AVOIDING DAMAGE OF INDEX
• PRESSURE FINE ADJUSTING DEVICE ENABLES HEIGHT OF ±1.5MM
• ADTHE HIGH PRECISION IMPORTED GRIPPER BAR CHAIN
• 8GRIPPER BARS WITH 12 GRIPPER SLICES AND SUPPORTING PARTS
• THE STANDARD POSITION OF THE GRIPPERS ON THE GRIPPER BAR IN RELATION TO THE CENTER LINE AXIS.
• THE PHOTOCELLS IN THE INPUT&OUTPUT SECTION ACTIVATE THE SHEET TRACKING AND MONITORING THE FRONT ORIENTATION.
• DIE CUTTING PLATE AND FRAME IS CONNECTED BY THE FIX-LOCK NUT AND SCREWS WITH THE CENTRAL LOCATION SYSTEM, CHANGING THE PLATE EASILY
• FAULT DISPLAY AND VELOCITY DISPLAY SCREEN MONITOR THE WHOLE MACHINE
• LUBRICATION SYSTEM IN EACH PART APPLIES COOLING LIQUID CIRCULATION DEVICE WITH OIL PRESSURE DISPLAY AND OIL-BREAK ALARM DEVICE.

Stripping Unit

• UP&DOWN FRAMES WITH THE CENTRAL LOCATION SYSTEM MAKES FRAME CHANGING CONVENIENT
• THE UP FRAME BREAKS AWAY APPLIES ELECTRICAL LIFT CONTROL , THE STROKE IS 400MM
• THE DOWN STRIPPING PLATE APPLIES CENTRAL LOCATING SYSTEM, MAKING OPERATION MORE CONVENIENT.
• FRONT STRIPPING FUNCTION APPLIES THE CENTRAL LOCATION SYSTEM.CLEANING THE EDGE OF BOARD ONCE.

BELT DELIVERY AND STACKING PART

• AUTO PILE STACKING LIFT
• AUTO STACKING WITH CONTINUOUS BELT
• DELIVERY BELT MAKES STACKING QUICKER AND MOVES CONVENIENT,MAKING SURE THAT PAINT NO SCRATCH

Lock Bottom Unit

• For folding of all lock flaps this unit is designed in 3 track system , so that the cartons remain under pressure of 2 tracks at the time of folding of lock flap , this prevents shifting or non alignment of cartons , saves wastage and increases speed .
• Self adjustable track for duplex and Three ply cartons

ELECTRICAL CONTROL UNIT

• PLC CONTROLS THE WHOLE RUNNING OF THE MACHINEAND BREAKDOWN MONITORING
• ELECTRICAL COMPONENTS AND ELECTRICAL LINE APPLY SAFETY STANDARD IN EUROPE AND USA

Die Cutting Machine